Installation Of The Software Expresso 3 - Techkon SpectroDrive Manual

2.1 Installation of the software ExPresso 3

System requirements:
• PC with MS-Windows XP or Vista
• 2 USB ports
• Screen resolution: 1024 x 768 or higher
The software is optimized to be
operated with a touch sensitive screen
(for example: Elotouch 1727L 17").
However, working without a touch-screen
by using a conventional mouse/trackpad
and keyboard is also possible
Recommended color bar:
Print control strip TECHKON TCS Digital
(included with ExPresso software)
Installation:
It is important to carry out the following steps in the right order, to make sure that
the USB device drivers will be installed properly.
1. Confirm that the USB-dongle and the module for wireless data transmission are
NOT connected to the PC. Insert the TECHKON CD into the CD drive of the
running computer. (You will find the CD in the inlay at the back of the manual.)
2. Select "ExPresso 3 Installation" from the menu.
The installation routine will start automatically.
Follow the steps of the installation, until it is completed.
3. Now, after the installation was finished successfully
you can connect the module for wireless data trans-
mission with the USB cable and the USB-dongle
to the PC.
4. TECHKON ExPresso can
now be launched:
Manual TECHKON SpectroDrive Chapter 2 - Installation
module for
wireless data
transmission
PC
Page 11