Techkon Spectro Jet Manual page 60

Analyze – Job report
"Job report" is an evaluation of the whole print job in regard to the target values and
tolerances according to customer standards.
You can choose between a summary (see the picture below) and the display of single
parameters e. g. dot gain 40 %, dot gain 80 %, slur/doubling, contrast and DE (ExPresso
Pro only), which you select by clicking in the pull-down-menu in the lower left corner
of the menu window (1.) (see page 58 for further information).
1.
Page 60 Manual TECHKON SpectroJet Chapter 3 – How to use SpectroJet