Installation Of The Software Expresso 4 - Techkon SpectroDrive Manual

Manual TECHKON SpectroDrive

2.2 Installation of the software ExPresso 4

Module for
wireless data
transmission
PC
WLAN-module for wireless data transmission
12
System requirements
Microsoft Windows 10; 64-bit, minimum:

IBM-compatible PC with Intel Core Duo or com-
parable processor, 4 GB RAM, 2 USB ports;
screen resolution for TECHKON ExPresso:
minimum 1280 x 1024 pixel
The software is optimized to be operated
with a touch sensitive screen.
However, working without a touch-screen by
using a conventional mouse / trackpad and
keyboard is also possible.
Recommended color bar:
Print control strip TECHKON TCS Digital
(included in delivery).
Installation
It is important to carry out the following steps
in the right order to make sure that the USB
device drivers will be installed properly.
1. Plug the TECHKON data media into the USB
port of the running computer. Make sure
that the USB-dongle (software protection
key) and the module for wireless data
transmission are not connected to the PC.
2. Select starter.exe and choose Install
TECHKON ExPresso. The installation rou-
tine will start automatically. Follow the
steps of the installation, until it is completed.
3. After the installation is finished successfully
you can connect the module for wireless
data transmission with the USB cable and
the USB-dongle to the PC.
4. TECHKON ExPresso can now be launched.