Techkon Spectro Jet Manual page 41

The "Search for" function supports the fast research for already existing "Print jobs".
Clicking in the "Edit" button (3., p. 40) provides a direct access to the submenu "Print
job  Make ready  Print job info".
Tip: New print jobs similar to old print jobs, can be set up by duplicating.Thus time
is saved, because settings can be taken over.
By using the duplication function also OK-sheets can be taken over for repeated print
jobs.
Make ready
Certain selections have to be made, before the measurements can be started.
Make ready – Print job info
Textual information about the print job can be edited in "Print job info".
The text entered in "Print job name" will be the title of the data set, which will be au-
tomatically saved by ExPresso. It can be selected from the "Print job  Select" menu.
During measurements it will be shown in the lower left section of the status bar.
The section "Customer name" and a text box for detailed "Remarks" concerning the
print job can be used optionally.
Manual TECHKON SpectroJet Chapter 3 – How to use SpectroJet Page 41