Software Module "Media Wedge - Techkon Spectro Jet Manual

4.9 Software module "Media Wedge"

The program module "Media Wedge" serves the fast, colorimetric analysis of the
Ugra/Fogra media wedge. This digital control element is available from Fogra, the
German "Graphic Technology Research Association" . The test
element is placed at the border of a proof. The software evaluates the color quality
printed in colorimetric terms.
Color di erences between the Fogra target values and the measured samples will be
clearly represented in the program module "Media Wedge".
1. Selection of the media w edge version
(you will find the version number on the
printed test element)
2. Overview of information concerning the
print job
3. Selection of reference values
Manual TECHKON SpectroJet Chapter 4 – SpectroConnect
5.
4. Overview of measurement results
5. Optionally a short protocol can be prin-
ted on a self-adhesive label with a Dymo label
printer, which can be stuck on the proof, or
a detailed report of the measurement values
can be printed out.
1.
2.
3.
4.
Page 71