Install Ram Mount; Components - Ram Mounting Kits - Honeywell Thor VM3 User Manual

Install RAM Mount

Caution: This device is intended to transmit RF energy. For protection
Before installation begins, verify you have the applicable vehicle mounting bracket
assembly components necessary, as shown in the following figures.

Components - RAM Mounting Kits

Mounting kits that do not include an external keyboard are shown below.
Mounting kits that include a provision for an external keyboard include the parts on this
page plus the parts on the next page.
In addition to the kits below, individual RAM mounting components are also available.
Mounting Kits without Keyboards
Each mounting kit contains:
RAM Ball (Size D) for back of Thor VM3 dock with
hardware (screws and washers) to attach RAM ball to
dock
RAM Arm (Size D), length varies by kit selected
One of three mounting options:
•
56
against RF exposure to humans and in accordance with FCC
rules and Industry Canada rules, this transmitter should be
installed such that a minimum separation distance of at least
20 cm (7.8 in.) is maintained between the antenna and the
general population. This device is not to be co-located with
other transmitters.
RAM Ball mount (Size D, may include 3 cone
washers), or
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide