Keyboard Remapper - Honeywell Thor VM3 User Manual

Keyboard Remapper

Start > Settings > Control Panel > Keyboard Remapper
Keyboard Remapper for
integrated Programmable
Keyboard Remapper is designed to remap keys on the integrated keypad (P1 thought
P7) or keys on an attached USB keyboard (such as the Honeywell 21-key numeric key-
board).
If programming both the integrated programmable keys and keys on a USB
keyboard, follow the process below.
1. If a USB keyboard has already been attached, remove the USB keyboard to program
2. Start the remapping utility.
3. Program the integrated programmable keys (i.e.: P1 - P7) on the Thor VM3.
4. Exit the remapping utility.
5. Attach the USB keyboard.
6. Restart the remapping utility.
7. Remap any keys desired on the USB keyboard.
If any modifications need to be made to the P1 - P7 keys at a later time, it is necessary to
remove any USB keyboard to edit these keys in the remapping utility.
To remap a key:
1. Select the desired key to remap from the Physical Key pull-down list.
2. Select the desired modifier key, for example:
3. Select the desired value for the remapped key from the Key Value pull-down list.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Keys
the integrated keys.
• Normal (no modifier), Orange or Blue for the integrated programmable keys (P1-
P7)
• Normal (no modifier), Yellow or Green for the 21-key numeric keyboard.
Keyboard Remapper for
21-key Numeric Keyboard
175