System - Honeywell Thor VM3 User Manual

System

Start > Settings > Control Panel > System
Use these Thor VM3 panels to:
•
•
•
Factory Default Settings
General
Memory
Device Name
Device Description
Copyrights
General
System: This screen is presented for information only. The System parameters cannot
be changed by the user.
Computer: The processor type is listed. The type cannot be changed by the user. Total
computer memory and the identification of the registered user is listed and cannot be
changed by the user.
Memory sizes given do not include memory used up by the operating system. For exam-
ple, a system with 128 MB may only report 99 MB memory, since 29 MB is used by the
operating system. This is actual DRAM memory, and does not include internal flash
used for storage.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Review System and mobile device data and revision levels.
Adjust Storage and Program memory settings.
Assign a device name and device descriptor.
No user interaction
1/4 storage, 3/4 program memory
Unique to equipment type
Unique to equipment type
No user interaction
207