Honeywell Thor VM3 User Manual page 294

•
Load Firmware Updates
The firmware update is provided by Honeywell customer support. The update consists
of a version string and a zip file. The version string is three numbers separated by peri-
ods, i.e.: 1.0.0 or 3.1.12.
Top load the firmware files:
1. Create a subfolder under the applicable carrier number that matches the version
2. Unzip the firmware file. The firmware update consists of three files:
•
•
•
3. Copy the three files into the update folder created above.
Configure the Thor VM3
Repeat these steps for each Thor VM3 that will be using FOTA. Once configured, the
Thor VM3 continues to check for firmware updates at the specified interval.
On the System Settings tab of the Connection Manager:
1. Check the Enable Firmware Update checkbox.
2. Select the desired frequency (daily or weekly) to Check for Updates.
3. Specify the Firmware Storage Path. This path includes the address of the web server
282
Open the web browser on the Thor VM3 and verify the URL of the server can be
accessed.
string. For example, if update 1.0.3 is received for carrier number 6, the folder would
be:
<Server URL>/<wwan>/<6>/<1.0.3>
carrier_pri.nvu
imageInfo.xml
spkg_sblz.cwe
but does not include the carrier number or version folders created. The carrier folder
and update folder are automatically detected by the update utility. For example, if
the web server is hosted at http://127.0.0.1, the path is entered as
http://127.0.0.1/wwan/
Important - the trailing / must be included after wwan.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide