Procedure; Bios - Honeywell Thor VM3 User Manual

•
•
•
•

Procedure

1. Verify a dependable power source is applied to the Thor VM3 and will stay connected
2. Copy the OS files to a USB thumb drive.
3. Copy the files from the USB drive to the Thor VM3's System folder.
4. During the file copy process to the Thor VM3 System folder, when asked
5. Review the files that were downloaded to the System folder.
6. Remove the USB drive.
7. Restart the Thor VM3.
8. When the OS finishes loading, check the OS update version by selecting Start >
The touch screen may require calibration, however some Windows OS versions save the
calibration data, eliminating the need to calibrate.
If the Thor VM3 won't boot up after the upgrade is finished, contact
Assistance

BIOS

The Microsoft Windows Embedded Compact operating system is installed before ship-
ping. The default BIOS parameters are configured at that time. In most cases, it is
unnecessary to modify the BIOS parameters.
Generally, it is only necessary to enter the BIOS setup to change the boot order of the
drives.
146
Use ActiveSync to back up Thor VM3 user files and store them elsewhere before
beginning an upgrade on the Thor VM3.
Maintain an uninterrupted AC/DC power source to the Thor VM3 throughout this
process.
The mSATA card with the OS and systems files must be present for the Thor VM3 to
boot.
Always perform OS updates when the Thor VM3 has a dependable external power
source connected to the Thor VM3.
during the upgrade procedure.
"Overwrite?", select Yes to All.
Settings > Control Panel > About > Software tab.
for re-imaging options.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Technical