Password - Honeywell Thor VM3 User Manual

Password

Start > Settings > Control Panel > Password
Important: This password must be entered before performing a Load Factory Defaults.
If entering a power-on or screen saver password does not allow you to disable this pass-
word protection or perform a Load Factory Defaults, contact
Factory Default Settings
Prompt if device unused for
Timeout
Password
Password
•
•
Check the box to enable the password, enter a timeout and select a password type.
Enter the password in the Password text box, then press Tab and type the password
again to confirm it.
A changed/saved password is in effect immediately.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
The password and password settings are saved during a restart.
After a password is assigned and saved, each time a Settings > Control Panel option
is selected, the user will be required to enter the password before the Control Panel
will open.
Technical
Disabled
0 minutes
Blank
Assistance.
191