Honeywell Thor VM3 User Manual page 225

Vehicle-mount rugged pc with microsoft windows embedded compact 7.0
Hide thumbs Also See for Thor VM3:
Table of Contents

Advertisement

Change password
By default, no password is assigned to ZoomZone. If a password is set, the password
must be entered to access the ZoomZone user interface to view or change configuration
parameters.
To set a password:
1. Tap the Change Password button.
2. Enter the current password. If no password is assigned, leave this entry blank.
3. Enter and confirm the new password. To remove a previously set password, leave the
4. Tap OK to confirm changes or Cancel to discard changes.
Set Zoom Area
The ZoomArea can be selected from the current active desktop display. To set the zoom
area:
1. Display the desired content on the Thor VM3 desktop.
2. Open the ZoomZone interface.
3. Tap the Set Zoom Area button.
4. Select the desired zoom area by tapping on the upper left corner of the desired area
Note: Be sure to select the desired area from the upper left corner to the lower right. Selecting
the area from a different corner may result in nothing (a black box) being displayed.
5. If the selected are is not satisfactory, repeat the step above to reselect an area.
6. At the top of the display, tap File and select one of the available options:
Show Zoom Area
Tap the Show Zoom Area button to show the currently selected zoom area. The selected
area is highlighted in red.
To see how the zoom area would be displayed during screen blanking.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Delay on Stop - Configure the delay between motion stopping and the screen
resuming normal behavior. The default is 2 seconds.
new password blank.
and dragging to the lower right corner of the desired area. The selected area is
highlighted by a red outline.
Save - Saves the selected zoom area are returns to the ZoomZone user interface.
Test - Previews the zoom area as it would be displayed during screen blanking.
Tap Accept Zoom to keep the zoom area and finish, or
Tap Reject Zoom to discard the zoom are and be returned to select a different
zoom area.
Exit - Discards changes and returns to the ZoomZone user interface.
213

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents