Honeywell Thor VM3 User Manual page 211

Result
The Thor VM3 continues to run and follows the Ignition Control/Ignition On power
scheme with timers reset at the time Ignition switched to Active.
An example of this case would be a Thor VM3 that is running on UPS and is then
mounted on a dock that has truck power and the ignition switch is already On.
Thor VM3 is On and Vehicle Ignition is Switched to Off
Conditions
The Thor VM3 is On and vehicle ignition changes from On to Off.
Result
The Thor VM3 follows the Ignition Control/Ignition Off power scheme with timers reset
at the time Ignition switched to Inactive. UPS charging is disabled.
An example of this case would be a Thor VM3 that is running on UPS and is then
mounted on a dock that has truck power and the ignition switch is already Off.
Auto-On Mode
In Auto-On mode, the Thor VM3 is turned On by the presence of external power with no
user interaction required. Ignition input is ignored when Auto-On Mode is enabled.
Note: When the UPS battery has been depleted or disconnected (the Thor VM3 is first powered
out of the box, the front panel has been replaced, etc.) power the Thor VM3 manually by
pressing the power button. After the initial power up, the Thor VM3 powers on
automatically when power is attached and Auto-On mode is selected.
Note: When Auto-On is used to power the Thor VM3 on automatically the
enabled.
Thor VM3 is Off
Conditions
The Thor VM3 is Off and gets external power, such as
•
•
•
Result
The Thor VM3 boots. Once booted the Thor VM3 follows the Auto-On power scheme
with timers reset after the boot completes.
Thor VM3 is On
Conditions
The Thor VM3 is On and gets external power, such as
•
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Thor VM3 is installed on a powered dock with the dock power switch On
Thor VM3 is already mounted to a dock and external power is applied to the dock
Thor VM3 is already mounted to a dock and the dock power switch is turned On
Thor VM3 is installed on a powered dock with the dock power switch On
Wakeup Timer must be
199