Honeywell Thor VM3 User Manual page 196

Command
Command
options
load
start
stop
unload
Options
Options
pkt_size
in bytes
cap_size
in bytes
.cap file
Run cmd
Performs the command selected. For example, to run Netlog and modify the packet size
do the following:
1. Select load from the Commands list and click the Run cmd button.
2. Select stop from the Commands list and click the Run cmd button.
3. Select options from the Commands list, enter the new packet size in the Options list
NDISLog
NDISLog creates a .TXT file that can be viewed with any text editor program that sup-
ports .TXT files.
184
Function
Specifies the option to perform. See the table below for the option parameters and
values.
Loads and starts Netlog.
Starts the Netlog process of logging the network traffic.
Stops Netlog from logging network traffic.
Unloads Netlog.
Function
Specifies the maximum packet size captured in bytes. This option should only be run after you
have called load and stop. Default is 5000.
Specifies the maximum size of Netlog0.cap or Netlog1.cap in bytes. This option should only
be run after you have called load and stop. Default is 500,000.
Specifies the name of the file to which network traffic information is saved. This option should
only be run after you have called load and stop. Default is \netlog.
and click the Run cmd button.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide