Honeywell Thor VM3 User Manual page 271

Note:
•
•
If both settings are not enabled, the WLAN radio does not identify itself as CCX V4 compatible when
associating to an access point.
CCX
CCKM
To save changes, tap Apply the button. Confirmation dialogs may be displayed.
To exit without saving changes, tap the X in the upper right of the window.
Tap restore default values, tap the Restore Default Values then tap Apply.
Radio
Power Save
Band Selection
DataRate
Selection
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
For CCX to be enabled, two settings must be enabled:
CCX must be enabled (checked) on this screen.
Enable Atheros Connection Settings must be enabled (checked) on the
Set the power save level. Options are Off (default) and Auto-PSM.
Note: Power save level is reset to the default (Off) after reboot.
Select the bands to use. Options are: A, BG, G, ABG (default).
To limit data rates, check the Limit DataRate checkbox. If checked, select the desired
rate (MCS0 to MCS15). MCS0 (Modulation and Coding Scheme) 0 is slowest, MCS15
is fastest but subject to more errors. Default is disabled.
Note: DataRate selection is reset to default (Disabled) after reboot.
Use CCX (Cisco Client Extensions) for faster roaming. Default is enabled.
Use CCKM (Cisco Centralized Key Management) for faster roaming. Default
is enabled.
Connection tab.
259