Honeywell Thor VM3 User Manual page 133

GPS Remote Mount Antenna
The external GPS antenna is an adhesive mount antenna.
1. Locate a mounting position on highest point on the vehicle, following these precau-
2. Clean the area where the antenna is to be mounted.
3. Remove the protective backing paper from the adhesive on the antenna and
4. Attach the connector on the coaxial cable to the GPS antenna connector on the
5. Use cable ties to secure the coaxial cable to the vehicle as necessary. Make sure the
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
tions:
• The antenna must be mounted so the antenna is not damaged while the vehicle
or any of its parts are moving.
position the antenna on the vehicle.
vehicle mounted Thor VM3.
cable is routed so it is not damaged by any moving parts of the vehicle.
The Remote Antenna Installation Kit
consists of the antenna and an inte-
grated cable. The remote antenna is
mounted on the top of a forklift, truck or
other vehicle and cabled to the Thor
VM3 inside the vehicle.
121