Power - Honeywell Thor VM3 User Manual

Power

Start > Settings > Control Panel > Power
The Thor VM3 power mode timers are cumulative.
The System Idle timer begins the countdown after the User Idle timer has expired and
the Suspend timer begins the countdown after the System Idle timer has expired.
When the User Idle timer is set to "Never", the power scheme timers never place the
device in User Idle, System Idle or Suspend modes (even when the device is idle).
The Display > Backlight setting is synchronized with the User Idle setting in the
Schemes tab in the Power control panel.
Factory Default Settings
The default Power Scheme selected for the Thor VM3 depends on:
•
•
The Power Schemes are defined below. The active Power Scheme depends on the user-
selected power configuration mode. However, if no external power is present, the Thor
VM3 uses the UPS Power Scheme regardless of user selected Power Configuration
mode.
•
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
if external power is connected to the Thor VM3,
and, for ignition control, the status of the vehicle ignition signal.
AC/DC - When AC/DC has been selected for the Power Configuration mode, this
Power Scheme is selected. Because of the presence of external power, this Power
Scheme has longer timeout values.
195