About Transferring Files Via Usb Connection; Install Software Apps With Autoinstall - Honeywell ScanPal EDA57 User Manual

6. Select Download. Follow the prompts to download the file.

About Transferring Files via USB Connection

If you plan on using a USB connection to transfer files to the mobile computer,
make sure you set the USB connection to allow file transfers. To learn more, see
Configure USB Connection and Transfer Files

Install Software Apps with AutoInstall

Important: The mobile computer must have power for the entire length of the install process or
it could become unstable. Do not attempt to remove the battery during the process.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the toggle button to turn Provisioning mode On.
4. Save the Android application file (*.zip or *.apk) in one of the following folders
5. Swipe up from the bottom of the Home screen to access all apps.
6. Tap AutoInstall Settings
7. Tap Packages Update from the AutoInstall Settings screen.
8. Once installation is complete, turn Provisioning mode Off.
Note: Some updates do not require the computer to reboot before installation.
76
> Honeywell Settings > Provisioning mode.
on the mobile computer:
• Internal shared storage\honeywell\autoinstall
Files saved to this folder for installation do not persist when a Full factory
reset or Enterprise data reset is performed.
• IPSM card\honeywell\autoinstall
Files saved to this folder for installation do not persist when a Full factory
reset is performed. However, the software does persist if an Enterprise data
reset is performed.
If required by the app, the computer may automatically initiate a reboot before
starting the installation process. When the installation is finished, a message
appears or the unit finishes rebooting and the lock screen appears.
on page 19.
and verify Enable Autoinstall is enabled .
EDA57 User Guide