Honeywell Thor VM3 User Manual page 108

6. Provide mechanical support for the cable by securing it to the vehicle structure at
7. Connect the watertight connector end of the power cable to the Thor VM3 dock
8. Secure the power cable to the Thor VM3 using the
9.
10. If using the
11. Press the
12. Press the
96
cause the wiring insulation to deteriorate. Always route the cable so that it does not
interfere with safe operation and maintenance of the vehicle.
approximately one foot intervals, taking care not to over tighten and pinch
conductors or penetrate outer cable jacket.
power connector by aligning the connector pins to the power connector; push down
on the watertight connector and twist it to fasten securely.
Place Thor VM3 in the Dock
Screen Blanking
previously installed.
Power Switch
Power Button
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
feature, install the screen blanking box or switch if not
on the back of the Thor VM3 dock.
on the front of the Thor VM3 to turn on the Thor VM3.
Strain Relief Cable Clamps.