Note: EDA61K-0 models do not include a WWAN radio. Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD™ or microSDHC™ memory cards with ScanPal mobile computers for maximum performance and durability. Contact a Honeywell sales representative for...
Mobile Computer Features Power Indicator Scan Engine Scan Indicator Touch Panel Scan Button Keyboard (model dependent) Power Button Microphone...
Camera Flash/Flashlight Laser Safety (model dependent) Label Location Hand Strap (optional accessory) Speaker Battery Scan Button Battery Latch and Button I/O Connector Micro SIM Card and MicroSD Card Cover (battery removed) USB Port...
Install a Micro SIM Card Only EDA61K-1 (WWAN) models support micro SIM card use for cellular phone features. Note: Always power off the computer before attempting to install or remove a card.
Install a microSD Card (Optional) Note: Format the microSD card before initial use. Note: Always power off the computer before attempting to install or remove a card.
The EDA61K ships with a Li-ion 3.6 V battery manufactured for Honeywell International Inc. We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Ensure all components are dry prior to placing the battery in the computer.
5 hours. Using the computer while charging the battery increases the time required to reach a full charge. We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty.
To turn the computer off: Press and hold the Power button until the options menu appears. Touch Power off. Note: You should always power off the computer before removing the battery. Remove the Battery Battery Replacement Hot Swap You can replace the battery on demand provided the following conditions are met: •...
Sleep Mode Sleep mode automatically turns the touch panel display off and locks the computer to save battery power when the computer is inactive for a programmed period of time. Press and release the Power button to wake the computer. Drag the lock icon toward the top of the display to unlock the Mobile.
About the Home Screen Notification / Status Bar Home Screen Panel Favorites Tray Search Bar Touch to initiate a voice search or command. Navigation Buttons To learn how to customize the Home screen, see the user guide.
Navigation and Function Buttons For button locations, see Mobile Computer Features. Button Description Back Return to the previous screen. Home Return to the Home screen. Scan Press left, right or front scan button to trigger the scanner. Recent Apps View and switch between recently used apps.
About Provisioning Mode After completing the out-of-box set up process, Provisioning mode is automatically turned off. Scanning a barcode to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning mode in the Settings app. To learn more, see the user guide. Scan a Barcode with the Scan Demo For optimum performance, avoid reflections by scanning the barcode at a slight angle.
Sync Data To move files between your EDA61K and your computer: Connect the EDA61K to your computer using a USB charge/communication dock or snap on. On the EDA61K, swipe down from the top of the screen to see the notifications panel. Select the Android System notification twice to open the options menu.
Restart the Mobile Computer You may need to restart the mobile computer to correct conditions where an application stops responding to the system or the computer seems to be locked up. Press and hold the Power button until the options menu appears.
Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.