Restore Raid Controller Configuration (Oracle Hardware Management Pack) - Oracle X7 series Administration Manual

1. Access the operating system command-line interface.
For more information, see
Hardware Management Pack" on page
2. Use the
ilomconfig import
ilomconfig import config --xmlfile=filename.xml
A prompt appears asking you to confirm that you want to import the settings from the XML file
you specified.
Type to confirm that you want to proceed.
3.
y
A second prompt appears asking whether you want to specify a passphrase. If a passphrase
was used to encrypt sensitive data in the backup file, the passphrase is required to restore the
sensitive data.
4. If you included sensitive data in the XML file, and you want to restore the
sensitive information, enter the passphrase.
Related Information
Configuring Oracle ILOM (ilomconfig), Oracle Hardware Management Pack Server CLI
■
Tools User's Guide at
Restore RAID Controller Configuration (Oracle
Hardware Management Pack)
You can restore the configuration of a RAID controller using an XML file that was exported
as described in "Back Up RAID Controller Configuration (Oracle Hardware Management
Pack)" on page 94.
The exported XML file contains configuration information for all the RAID controllers in the
system. When you import the RAID controller configuration, Oracle Hardware Management
Pack detects any RAID controllers that are unconfigured, and updates only those.
1. Access the operating system command-line with root privileges.
For more information, see
Hardware Management Pack" on page
To import a configuration and update any unconfigured RAID controllers, type:
2.

Restore RAID Controller Configuration (Oracle Hardware Management Pack)

"Accessing the Host Console" on page 38
32.
command:
http://www.oracle.com/goto/ohmp/docs
"Accessing the Host Console" on page 38
32.
Backing Up and Restoring Hardware and Firmware Configurations
or "Accessing Oracle
or "Accessing Oracle
99