Controlling The Server Power State; Server Power State Overview - Oracle X7 series Administration Manual

Controlling the Server Power State

This section defines the server power states and power control options, provides procedures for
powering the server on and off, and describes power-on policies in Oracle Integrated Lights Out
Manager (ILOM).
Task
Review the possible server power states.
Review power control options.
Power the server off or on.
Set a power-on policy.

Server Power State Overview

The server has the following power states.
Power State
Powered off
Standby power
Main power
Link
"Server Power State Overview" on page 41
"Power Control Options" on page 42
"Powering the Server Off and On" on page 42
"Setting SP Policy for Host Power at Boot (Oracle
ILOM)" on page 45
Description
The server is completely powered off only when the power cords are
disconnected.
In Standby power mode, the host is powered off, while the service processor is
powered on. The System OK LED on the front panel blinks.
When you power on the host, the server enters Main power mode. In Main power
mode, the System OK LED is steady on.
You can power the host off gracefully, or immediately.
When you power off the server gracefully, Advanced Configuration and Power
Interface (ACPI)-enabled operating systems prepare the operating system before
shutting it down. When you power the server off immediately, no such attempt
occurs.
Controlling the Server Power State 41