Restore A Saved Oracle Ilom Firmware Configuration (Oracle Ilom) - Oracle X7 series Administration Manual

Restore a Saved Oracle ILOM Firmware Configuration (Oracle ILOM)

b. Use the
set System/BIOS/Config restore_options=[all|config_only|bootlist_only]
load_uri=transfer_method://username:password@host/filepath
Where:
■
■
■
■
Note -
password.
Related Information
Restore BIOS Configuration, Oracle ILOM Administrator's Guide for Configuration and
■
Maintenance, Firmware Release 4.0.x at
Restore a Saved Oracle ILOM Firmware
Configuration (Oracle ILOM)
Ensure that you have the privileges associated with the following roles in Oracle ILOM: Admin
Before You Begin
(a), User Management (u), Console (c), and Reset and Host Control (r).
To restore a saved Oracle ILOM configuration from the Oracle ILOM web
1.
interface:
a. Log in to the Oracle ILOM web interface.
For instructions, see
In the navigation pane, click ILOM Administration → Configuration
b.
Management.
Select Restore in the Operation drop-down list.
c.
96 Oracle X7 Series Servers Administration Guide • September 2017
command:
set
transfer_method is one of the following protocols: tftp, ftp, sftp, scp, http, or
https.
username and password are your credentials on the remote system where the backup
file is saved.
host is the IP address or hostname of the system where the backup file is saved.
filepath is the relative path to the backup file.
If you transfer the backup file using TFTP, you do not need to provide a username or
"Accessing Oracle ILOM" on page
http://www.oracle.com/goto/ilom/docs
21.