Table of Contents
Advertisement
Set SP Host Power Policy at Boot
■
The power on policies are mutually exclusive, that is, only one can be enabled at a time.
For more information about each policy, click the More Details link at the top of the page.
d.
In the Actions drop-down list, select Enable.
2.
To set a power-on policy in the Oracle ILOM command-line interface (CLI),
perform the following steps:
Log in to the Oracle ILOM CLI.
a.
For instructions, see
b.
Use one of the following commands:
■
■
The power-on policies are mutually exclusive, that is, only one can be enabled at a time.
Related Information
Power-On and Cooling-Down Policies Configurable from the Server SP, Oracle ILOM
■
Administrator's Guide for Configuration and Maintenance, Firmware Release 4.0.x
46
Oracle X7 Series Servers Administration Guide • September 2017
Set host power to last power state on boot
"Accessing Oracle ILOM" on page
set /SP/policy HOST_AUTO_POWER_ON=enabled
set /SP/policy HOST_LAST_POWER_STATE=enabled
21.
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the X7 series and is the answer not in the manual?
Questions and answers