Configure Dns Server Information On The Sp (Oracle Hardware Management Pack) - Oracle X7 series Administration Manual

For instructions, see
b. To enable Oracle ILOM to automatically retrieve DNS information from a
DHCP server on the network, use the
set /SP/clients/dns auto_dns=enabled
c. If is disabled, set one more name servers and search paths:
auto_dns
set /SP/clients/dns nameserver=ip_address_1,ipaddress_2,ipaddress_3 searchpath=
domain_1.com,domain_2.edu,and so on
You can specify up to three IP addresses and up to six search paths.
d. Set the DNS timeout and retries:
set /SP/clients/dns timeout=timeoutInSeconds retries=retries
Where timeout is an integer between 1 and 10, and retries is an integer between 0 and 4.
Related Information
Modifying Default Connectivity Configuration Properties, Oracle ILOM Administrator's
■
Guide for Configuration and Maintenance, Firmware Release 4.0.x at
com/goto/ilom/docs
Configure DNS Server Information on the SP
(Oracle Hardware Management Pack)
Access the operating system command-line with root privileges.
1.
For more information, see
Hardware Management Pack" on page
2. To enable Oracle ILOM to automatically retrieve DNS information from a DHCP
server on the network, use the following command:
ilomconfig modify dns --autodns enabled --retries retries --timeout timeout
Where timeout is an integer between 1 and 10, and retries is an integer between 0 and 4.
3. If you prefer to disable
ilomconfig modify dns --nameservers nameserverlist --autodns disabled --retries retries --
searchpath searchpathlist --timeout timeout

Configure DNS Server Information on the SP (Oracle Hardware Management Pack)

"Accessing Oracle ILOM" on page
"Accessing the Host Console" on page 38
32.
, use the following command:
autodns
21.
command:
set
or "Accessing Oracle
Configuring Oracle ILOM
http://www.oracle.
65