Oracle X7 series Administration Manual page 28

Access the Host Console From the Oracle ILOM CLI
Host storage device redirection: Mount an image file on the server service processor (SP)
■
and redirect that image to the host. Host storage device redirection is useful when installing
an operating system.
To launch a remote redirection session from Oracle ILOM, see the following procedures:
"Access the Host Console From the Oracle ILOM CLI" on page 28
■
"Launch a Graphical Remote Console Redirection Session" on page 29
■
"Configure a Host Storage Device Redirection Session" on page 30
■
Access the Host Console From the Oracle ILOM CLI
You can use the Oracle ILOM command-line interface (CLI) to access the system console.
You can launch multiple console sessions from the Oracle ILOM command-line interface.
However, only the first current console session is granted read and write privileges. All other
sessions are read-only. Read and write privileges are reassigned when a user with read and write
privileges closes their session, and a new serial session is opened.
Ensure that you have Console (c) role privileges in Oracle ILOM.
Before You Begin
1. Log in to the Oracle ILOM command-line interface.
For instructions, see
Type
2.
start /HOST/console
A confirmation prompt appears.
3. Type
y
You are now viewing the host console.
If you are prompted for user credentials, enter the requested information to
4.
access the host server operating system.
You are now logged in to the host server operating system through the serial console.
Note -
console.
To terminate the console session press the Esc key and the left parenthesis key
5.
(Shift+9).
Note -
28 Oracle X7 Series Servers Administration Guide • September 2017
"Accessing Oracle ILOM" on page
.
to confirm that you want to access the host console.
To enter standard Oracle ILOM CLI commands, you must first exit the host serial
To send a break to the host, press the Escape (Esc) key and type uppercase B.
21.