Manually Clearing Hardware Faults; Manually Clear A Hardware Fault (Oracle Ilom) - Oracle X7 series Administration Manual

Configuring Alert Notifications, Oracle ILOM Administrator's Guide for Configuration and
■
Maintenance, Firmware Release 4.0.x at

Manually Clearing Hardware Faults

Typically, when a faulted component is replaced or removed, Oracle ILOM and Hardware
Management Pack stop reporting the component as faulted. However, certain field-replaceable
units (FRUs) require an explicit repair. For these you must manually clear the fault in the Oracle
ILOM Fault Management shell to stop it from appearing in the open problems output.
For instructions to manually clear a fault, see:
ILOM)" on page 81

Manually Clear a Hardware Fault (Oracle ILOM)

Ensure that you have Admin (a) role privileges in Oracle ILOM.
Before You Begin
1. Log in to the Oracle ILOM command-line interface.
For instructions, see
Type
2.
start /SP/faultmgmt/shell
A confirmation prompt appears.
Type
3.
y
The faultmgmtsp> prompt appears.
Use the
4.
faulted.
For more information, refer to Using the Oracle ILOM Fault Management Shell, Oracle ILOM
Administrator's Guide for Configuration and Maintenance, Firmware Release 4.0.x at:
www.oracle.com/goto/ilom/docs.
"Accessing Oracle ILOM" on page
to confirm that you want to start the Oracle ILOM Fault Management shell.
utility to indicate that a component should not be considered
fmadm
http://www.oracle.com/goto/ilom/docs
"Manually Clear a Hardware Fault (Oracle
21.
to launch the Oracle ILOM Fault Management shell.
Monitoring Server Inventory and Health

Manually Clearing Hardware Faults

http://
81