Reset Oracle Ilom Firmware To Default Settings (Oracle Hardware Management Pack) - Oracle X7 series Administration Manual

2. To reset the Oracle ILOM firmware to default settings in the Oracle ILOM
command-line interface (CLI):
Log in to the Oracle ILOM CLI.
a.
For instructions, see
b. Type:
set /SP reset_to_defaults=factoryset
Related Information
Reset the Oracle ILOM Configuration to Factory Defaults, Oracle ILOM Administrator's
■
Guide for Configuration and Maintenance, Firmware Release 4.0.x at
com/goto/ilom/docs
Reset Oracle ILOM Firmware to Default Settings
(Oracle Hardware Management Pack)
1. Access the operating system command-line with root privileges.
For more information, see
Hardware Management Pack" on page
2. Type:
ilomconfig reset config
A prompt appears asking you to confirm that you want reset the Oracle ILOM configuration.
3. Type to confirm that you want to proceed.
y
Related Information
Configuring Oracle ILOM (ilomconfig), Oracle Hardware Management Pack Server CLI
■
Tools User's Guide at:

Reset Oracle ILOM Firmware to Default Settings (Oracle Hardware Management Pack)

"Accessing Oracle ILOM" on page
"Accessing the Host Console" on page 38
32.
http://www.oracle.com/goto/ilom/docs
Backing Up and Restoring Hardware and Firmware Configurations
21.
http://www.oracle.
or "Accessing Oracle
103