Bios Setup Utility Key Mappings; Common Bios Setup Utility Tasks - Oracle X7 series Administration Manual

BIOS Setup Utility Key Mappings

When you view the BIOS Setup Utility from a terminal device using the Oracle ILOM remote
console feature, the terminal device might not support function keys. The BIOS Setup Utility
supports the mapping of function keys to Control key sequences when serial redirection
is enabled. The following table provides a description of the function key to Control key
mappings.
Function Key
F1
F2
F7
F8
F10
F12

Common BIOS Setup Utility Tasks

Some of the common BIOS Setup Utility tasks in this guide include:
Select the Boot Device:
■
Reset the BIOS Firmware to Defaults:
■
(BIOS)" on page 100
Configure TPM Support:
■
Exit BIOS Setup Utility:
■
Control Key Sequence BIOS POST Function
Ctrl+Q Not applicable.
Ctrl+E Enter the BIOS Setup
Utility while the system is
performing the power-on
self-test (POST).
Ctrl+D Not applicable.
Ctrl+P Activate the BIOS Boot
menu.
Ctrl+S Not applicable.
Ctrl+N Activate Network boot.
"Modifying the Boot Order" on page 48
"Reset BIOS Firmware to Default Settings
"Configure BIOS Support for TPM (BIOS)" on page 50
"Exit the BIOS Setup Utility" on page 38
Accessing and Using System Administration Tools
Access the BIOS Setup Utility
BIOS Setup Function
Activate the BIOS Setup
Utility Help menu.
Not applicable.
Discard changes.
Not applicable to the
Avago MegaRAID
Configuration Utility.
Not applicable.
Activate the Exit dialog
box menu.
Not applicable to the
Avago MegaRAID
Configuration Utility.
Not applicable.
37