Modify Iscsi Virtual Drive Properties (Bios) - Oracle X7 series Administration Manual

Modify iSCSI Virtual Drive Properties (BIOS)

Parameter
Target name
iSCSI initiator name
Note -
formats for its initiator and target names.
Logical Unit Number
IP address of iSCSI server
Port number
Modify iSCSI Virtual Drive Properties (BIOS)
Use this procedure to configure iSCSI virtual drives using the iSCSI BIOS Setup Utility
screens.
iSCSI virtual drives are used primarily to run supported operating systems that reside on an
external server and that function as the local server host operating system.
iSCSI virtual drives must be configured in the UEFI BIOS Setup Utility iSCSI screens.
Ensure that the following prerequisites are met:
Before You Begin
You are familiar with iSCSI theory of operation and with iSCSI server setup procedures.
■
You have verified that iSCSI targets can be mounted on a client. Review the operating
■
system documentation for more information.
You have access to an external iSCSI server running on a supported operating system.
■
1. Access the BIOS Setup Utility.
For instructions, see
Navigate to the Advanced menu.
2.
Select iSCSI Configuration.
3.
56 Oracle X7 Series Servers Administration Guide • September 2017
iSCSI requires iSCSI Qualified Names (iqn)
"Accessing the BIOS Setup Utility" on page
Example
iqn.1988-12.com.oracle:platform-target
iqn.1988-12.com.oracle:0010E02E458F
LUN 0
192.167.1.24 (IPv4)
3260
34.