Set Enhanced Pcie Cooling Policy (Oracle Ilom) - Oracle X7 series Administration Manual

Set Enhanced PCIe Cooling Policy (Oracle ILOM)

Ensure that you have Admin (a) role privileges in Oracle ILOM.
Before You Begin
1. To set the Enhanced PCIe Cooling Policy in the Oracle ILOM web interface:
a. Log in to the Oracle ILOM web interface.
For instructions, see
b. In the navigation pane, click System Management → Policy.
The Policy Configuration page appears.
c. In the Service Processor Policies table, select Set Enhanced PCIe Cooling
Mode Policy.
Select Enable or Disable in the Actions drop-down list.
d.
The policy takes effect at the next server reset.
To set the Enhanced PCIe Cooling Policy in the Oracle ILOM command-line
2.
interface:
a. Log in to the Oracle ILOM CLI.
For instructions, see
b. Use the
The policy takes effect at the next server reset.
Related Information
Power On and Cooling Down Policies Configurable from SP, Oracle ILOM Administrator's
■
Guide for Configuration and Maintenance, Firmware Release 4.0.x at:
oracle.com/goto/ilom/docs
"Accessing Oracle ILOM" on page
"Accessing Oracle ILOM" on page
set /SP/policy ENHANCED_PCIE_COOLING_MODE=enabled|disabled
Monitor Server Power Consumption and Component Temperatures
Set Enhanced PCIe Cooling Policy (Oracle ILOM)
21.
21.
command.
http://www.
87