Mounting The Power Pack (Voltage Supply) - Thermo Scientific Smart2Pure 3 Operating Instructions Manual

Mounting the power pack (voltage supply)

Step Action
1
Remove the protective foil on the back of the universal
holder and from the universal adapter and attach the
universal holder to the center of the back of the main
adapter.
2 Attach universal adapter to a smooth wall surface with
supplied screws or with glue (not provided).
Thermo Scientific
Whenever possible, mount the power pack on the wall to the left or right of the
ultrapure water system where it is freely accessible and not come in contact with
water for get wet.
Take caution to ensure that the suitable plug and the power cable do not get wet.
Mount the power pack with dry hands.
Risk of an electrical shock.
Connections of the Smart2Pure 12 system
Figure
Universal foil
Universal
adapter
Mains
adapter
Universal adapter
7
Installation
Universal
holder
Wall surface
Smart2Pure
43