Table of Contents
Advertisement
7
Installation
Mounting the power pack (voltage supply)
Mounting the power pack (voltage supply)
Step
Action
1
Before beginning to work with the universal
adapter and holder remove the protective foil
from the backside of them.
Stick the universal holder which is supplied in the
assembly kit to the back of the power pack as
shown in the figure next to this text.
2
Stick the universal adapter to a smooth wall
surface or screw it to the wall using the dowels
and screws supplied in the assembly kit.
3
When the universal holder and universal adapter
have been fitted, hang the power pack in by
pressing the power pack to the holder and then
pull down (see red arrows).
The removable line cord must be shown to the
bottom.
4
Plug the connecting cable (appliance cable) in the
power pack socket.
Do not bring the power pack in contact with
water. Risk of an electrical shock.
GenPure
48
Whenever possible, mount the power pack on the wall to the left or right of the ultra
pure water system where it is freely accessible and not come in contact with water for
get wet.
Take caution to ensure that the suitable outlet and the power cable do not get wet
and mount the power pack with dry hands.
Risk of an electrical shock.
Figure
Power
pack
Universal
holder
Protective foil
Universal
adapter
Smooth
wall
surfacer
Power
pack
Power pack
Connecting cable
Universal
adapter
Universal adapter
Thermo Scientific
Advertisement
Table of Contents
