Attaching Wall Holder For 60L Pure Water Tank - Thermo Scientific Smart2Pure 3 Operating Instructions Manual

7
Installation
Connections of the Smart2Pure 12 system

Attaching wall holder for 60L pure water tank

Step Action
1 Locate the two metal brackets and baseplate and screw
in as shown in the diagram the six countersunk screws
and hexagon nuts supplied with the brackets.
2 Hold the wall holder at the desired position on the wall
and mark the six boreholes for fixing the wall holder.
Then use a 8 mm or 0.31 inch twist drill to make the
holes and put in the six S8 plugs which are supplied
with the wall holder.
Smart2Pure
40
Figure
Mark up here the
position for bore-
holes
Wall
Thermo Scientific