Setting The Limiting Value For Temperature - Thermo Scientific Smart2Pure 3 Operating Instructions Manual

12
System control

Setting the limiting value for temperature

Step Action
1 Press the "Menu" button three times to enable
the limiting value for the temperature to be
set (red LED lights up).
2 Use the "up/quit" and "down" button to
increase or reduce the value. With the "Enter"
button you switch to the next digit. After
finishing adjustment press "Enter" to confirm
the value.
3 Press the „"Menu" button once to return to
the operating mode.
Smart2Pure
60
• The limiting value is factory adjusted to a value of +35°C.
• Setting range: 10°C - 40°C, basic setting: 35°C
Picture
Display
Second line
Display shows
Limit value Cond.
or
35°C
Display
shows
35°C
Temp.
Status Sensor
Display shows
35°C
Thermo Scientific