Summation Of Weighing Values - KERN KLB-TM Operating Manual

8.13 Summation of weighing values

This function enables you to determine the sum of several weighings.
The current sum of the last weighings is shown when the arrow pointing to the sigma
summation sign (∑) above the display is active.
Operation:
Turn on display unit by pressing the ON/OFF key
Press F -key
Repeatedly press the a key until 8 Add appears
Press TARE key
Place weight (e.g. 0.2 kg) on weighing plate
Press print key (import to summation memory)
Remove weight
Place weight (e.g. 0.5 kg) on weighing plate
Press print key (import to summation memory)
To cancel current summation, press the Print key again,
and the following message will appear
Unload weighing plate
Place weight for next summation
Press Print key (import to summation memory) etc.
Go back to weighing mode by pressing the F key twice.
Once again, the value for the sum will be stored when this function is cancelled (by
disconnection or power cut) and you may continue from where the interruption took
place. To achieve this, call the function as described above and the sum so far will
appear automatically.
If the display range of the display unit is exceeded by the sum total, "5-Full" will
appear.
KLB-TM-BA-e-0811
Display:
0.000 kg
1 Funi
8 Add
P 0.000 kg
0.200 kg
∑ 0.200 kg
P 0.000 kg
0.500 kg
∑ 0.700 kg
unLoAd
P 0.000 kg
1.000 kg
∑ 1.000 kg
37