Table of Contents
Advertisement
7 Basic Operation
7.1
Start-up
Press
, the appliance will carry out a self-test. As soon as the weight display
appears, the instrument will be ready to weigh.
7.2
Switching Off
Press
, the display will disappear.
7.3
Zeroing
Resetting to zero corrects the influence of light soiling on the weighing plate.
Resetting range ± 2 % max.
To unload the weighing system
Press
, the zero display appears.
7.4
Simple weighing
Place goods to be weighed on balance.
As soon as the unit is shown the weighing scale will be in a steady state.
Read weighing result.
Overload warning
Overloading exceeding the stated maximum load (max) of the device, minus a
possibly existing tare load, must be strictly avoided. This could damage the
instrument.
Exceeding maximum load is indicated by the display of "Error", and an audio
sound. Unload weighing system or reduce preload.
KDE-T-BA_IA-e-1210
14
Advertisement
Table of Contents
