Automatic Taring - KERN KLB-TM Operating Manual

8.11 Automatic taring

This function is to be used for faster calculation of the net weight, in case the tare
load changes for each weighing.
Operation:
Turn on display unit by pressing the ON/OFF key
Press F -key
Repeatedly press the a key until 6 AtAr appears
Press TARE key
When the weighing plate is without load, press the a key
Put vessel of goods to be weighed on weighing plate
A stable weighing value will start automatic taring
The display shows
Place weight in weighing container, net weight of weighed
item will be shown.
Remove weight together with weighing container
Set up weighing container etc. for next weighing process
Go back to weighing mode by pressing the F key twice.
Important: Ensure that the minimum weight
entered (For setting see chpt. 9.5) is lower than the weight of the weighing container
or the weighing container will not be tared automatically.
KLB-TM-BA-e-0811
Display:
0.00 g
1 Funi
6 AtAr
0.00 g
0.00 g
123.45 g
------
NET 0.00 g
NET 67.23 g
0.00 g
0.00 g
35