Switch-Over Weighing Unit (Only Not Verifiable Weighing Systems) - KERN KFB-TM Operating And Installation Instructions

7.5 Switch-over weighing unit (only not verifiable weighing systems)

How to enable weighing units:
 Call-up menu item P5 Unt, see chap. 8.1

Press and the first weighing unit with the current setting
will be displayed.

To enable [on] / disable [off] the displayed weighing unit,
press
 Acknowledge with
will be displayed.

To enable [off] / disable [on] the displayed weighing unit,
press .

Acknowledge with

Repeat sequence for each weighing unit.
Note:
„tj" and „Hj" cannot be activated at the same time, only either
... or ... .

Return to weighing mode using
Switch-over weighing unit:

Keep pressed, the display changes over to the
weighing units activated before (e.g. kg  lb)
KFB/KFN-TM-BA_IA-e-1220
. The next unit with the current setting
.


25