Taring; Taring By Setting A Weight - KERN KLB-TM Operating Manual

8.4 Taring

The dead weight of any weighing container may be tared away by pressing a button,
so that the following weighings show the net weight of the goods to be weighed.
Turn on display unit by pressing the ON/OFF key
The display unit is ready for weighing when the
weight display shows "0.00".
Put on items to be weighed, weighed value is
displayed.
To start the taring process press the TARE key.
The weight of the container is now saved
internally. The display shows the symbol Net
Place the goods to be weighed into the tare
container.
Read the weight of the goods on the display.
The taring process can be repeated any number of times, e.g. when adding several
components for a mixture (adding).
The limit is reached when the whole weighing range is exhausted.
After removing the taring container the total weight is displayed as negative display.

8.4.1 Taring by setting a weight

Press the a key and TARE key simultaneously
Press TARE key
Use the TARE key, to select the digit to be changed,
the a key is used to increase the numerical value
(active digit flashing)
Setting is imported by pressing the PRINT key and
balance returns to weighing mode.
This type of taring may be carried out in weighing mode at any time.
20
Operation:
Operation:
Display:
0.00 g
19.68 g
0.00 g
53.25 g
Display:
NET 000.00 g
NET 000.00 g
NET 020.000 kg
0.00 g
KLB-TM-BA-e-0811