Table of Contents
Advertisement
8.7.2 Auto Zero
This function is used to tare small variations in weight automatically.
In the event that small quantities are removed or added to the material to be
weighed, incorrect weighing results can be displayed due to the "stability
compensation" in the display unit. (e.g. slow flow of liquids from a container placed on
the balance, evaporating processes).
When apportioning involves small variations of weight, it is advisable to switch off this
function.
Auto Zero
Auto Zero
Selecting the menu item
Press TARE key
Press the a key until the following display
appears
To change your selection, press the TARE key.
To change your selection, press the a key.
Setting will be imported by pressing the PRINT key.
28
no
Disconnection of auto zero function
YES
Auto zero function turned on
Operation:
Display:
P1 rEAd
1.1.Fil
1.2 Auto
no
YES
1.2 Auto
KLB-TM-BA-e-0811
Advertisement
Table of Contents
