Parameter Description For Configuration - KERN KLB-TM Operating Manual

13.2 Parameter description for configuration

Parameter Ground
setting
P 0.0 A/d -
P 0.1 Uni g
P 0.2 div1 0.001
P 0.3 div2 0.001
P 0.4 FulS 006.009
P 0.5 rn 2 000.000
P 0.6 Auto 0.25 d
P 0.7 wEi 000.500
P 0.8 St_u -
P 0.9 CAL -
P 0.A Gcor 1.00000
P 0.b LFt no
P 0.c rAn yes
P 0.d Acu no
P 0.E toSC IndSt
P 0.F dFLt -
P 0.L Line -
KLB-TM-BA-e-0811
Range Description
- A/D converter value
kg - lb - g Weighing unit
0.000 - 50 Lowest value digit and zero position of
first range
0.000 - 50 Lowest value digit and zero position of
second range
- Maximum load
- Switch point between first and second
range
0.10 d– Auto zero range
5.00 d
0 - 1 Adjustment weight in respect of
maximum load
- Initial weight for adjustment
- Default adjustment
0.90000 – Factor for gravity constant
1.10000
no - yes Verified display unit
no - yes Initial weight adjustment
yes – ON, no – OFF
no – SLA- Selecting power supply
NiMH No- without Bat-Lo display
SLA- battery pack 6V with Bat-Lo display
NiMH-batteries 6x 1.2V with Bat-Lo
display
IndSt- Firmware version:
HunnA- IndSt
Hunnb HunnA
Hunnb
- Reset to default setting
- Linearization (max. 6 points)
Industrial balance
Medical balance (Hold + BMI)
Medical balance (Hold)
49