P1 Read - Basic Settings; Filter Settings - KERN KLB-TM Operating Manual

Table of Contents

Notice:

Display unit is equipped with rechargeable NiMH batteries and plug-in power pack.

During initial operation it is very important to charge the batteries for c. 12 hours.

Afterwards discharge the batteries completely 3 times (watch display message and

automatic disconnection) and recharge. If this is done, the life of the batteries will be

increased and the nominal capacity of the batteries reached.

8.7 P1 rEAd – basic settings

This menu item allows the display unit to be set according to specific ambient

conditions and measuring purposes.

OFF

Filter turned off

1-4

Filter levels:

Sensitive and fast (very quiet set-up location).

Robust but slow (very busy set-up location)

Selecting the menu item

Press TARE key

To change your selection, press the a key.

Setting will be imported by pressing the PRINT key.

KLB-TM-BA-e-0811

Operation:

Display:

P1 rEAd

1.1.Fil

OFF

1.1.Fil

Table of Contents