Operation; Start-Up; Switching Off; Zeroing - KERN VHP-T Operating And Installation Instructions

8 Operation

8.1 Start-up

 Press
. As soon as the weight display appears, the instrument will be ready
to weigh.

8.2 Switching Off

 Press
, the display will disappear.

8.3 Zeroing

Resetting to zero corrects the influence of light soiling on the weighing plate. If
required, the device may be reset to zero at any time.
 To unload the weighing system
 Press
, the zero display appears.

8.4 Simple weighing

 Place/drive-on weighing goods (at walking speed)
 Read weighing result.
Overload warning
Overloading exceeding the stated maximum load (max) of the device, minus a
possibly existing tare load, must be strictly avoided. This could damage the
instrument.
Exceeding the maximum load is indicated by the display „----".
Unload weighing system or reduce preload.
VHP-T-BA_IA-e-1611 15