Percent Determination; Determination Of The Reference Weight By Weighing - KERN KLB-TM Operating Manual

Place as many parts to count on the weighing plate as the set
reference quantity requires.
Confirm by pressing the PRINT key.
The display unit is now in piece counting mode and counts all
pieces present on the weighing plate (e. g. 100 pieces)
Go back to weighing mode by pressing the F key twice.
If you select this function (press the F key) but no reference pieces are present on
the weighing plate, the message –Lo- will appear briefly on the display and the
display unit's display will return to weighing mode.

8.9 Percent determination

Percent determination allows weight display in percent, in relation to a reference
weight.

8.9.1 Determination of the reference weight by weighing

Operation:
Turn on display unit by pressing the ON/OFF key
Press F -key
Repeatedly press the a key until 4 PrcA appears
Press TARE key
Place the reference weight
Press PRINT key, the weight is taken as reference
(100%).
Now you can place the test objects onto the weighing
plate; the percentage is displayed
Go back to weighing mode by pressing the F key twice.
32
100.0 g
pcs
15
100
666.66 g
Display:
0.00 g
1 Funi
4 PrcA
LoAD
120.00 g
100.00 %
70.37 %
0.00 g
KLB-TM-BA-e-0811
pcs