Battery Status Display; Charge Display - KERN KLB-TM Operating Manual

8.6.5 Battery status display

This function is used to display the charge status of the battery.
Press the F key and TARE key simultaneously
1 second later
2 seconds later
The display unit returns to weighing mode after the charge status of the battery was
shown. The display symbol
the battery drops below 18%.

8.6.6 Charge display

This function can be used to suppress the charge function.
This suppresses the short illumination of the battery symbol if the weighing unit is
operated without battery or accumulator. (supply by power pack)
The kind of supply is shown when the balance is started. bAtt / SLA / nlnnH
nlnnH
CHr6 YES
SLA
CHr6 YES
bAtt
CHr6 no
ATTENTION! Explosion hazard: For battery operation the setting must be no
Selecting the menu item
Press TARE key
Repeatedly press the a key until the following
display appears
To change your selection, press the TARE key.
To change your selection, press the a key.
Setting will be imported by pressing the PRINT key.
26
Operation:
(bat low) will be activated when the charge status of
Function activated / 6 x NiMH battery in use
Function activated / SLA battery in use
Battery operation
Operation:
Display:
0.00 g
batt
94%
0.00 g
Display:
P5 othr
5.1.bl
5.5. CHr6
no
YES
5.5.CHr6
KLB-TM-BA-e-0811