Settings For Menu Item P4.1 Ffun For "All - KERN KLB-TM Operating Manual

Is the parameter set to ALL in menu 4.1.FFun, access to the functions set to YES in
the P4FFunc menu is available via the F key.
(See chpt. 8.5.1)
However, if in menu 4.1.FFun one of the above parameters is selected, e. g. PcS,
the F key can merely be used to call just this particular menu item.

8.5.1 Settings for menu item P4.1 FFun for "ALL"

Here, you select the menu items that are subsequently selectable with the F key. no
function not available.
YES function is available.
Selecting the menu item
Press TARE key
Press the a key
Press the a key until the operating mode "piece
counting" appears
Press the TARE key until active setting appears:
"no" = deactivated, "yes" = activated
To change the setting, press the a key.
Setting will be imported by pressing the PRINT key.
Press the a key until the operating mode
"tolerance weighing" appears. Activation as
described for piece counting
Please repeat this sequence of operations for any other operating mode available.
4.2.Funi
4.3.PcS
4.4.HiLo
4.5 PrcA
4.6 Prcb
4.7 AtAr
4.8 toP
4.9 Add
For this, press the F key repeatedly until SavE ? appears on the display. Store
changes carried out by pressing the PRINT key.
22
Operation: Display:
P4 Func
4.1.FFun
4.2.Funi
4.3.PcS
no
YES
4.3.PcS
4.4.HiLo
KLB-TM-BA-e-0811