Ericsson RBS 2106 Reference Manual page 82

Radio Configurations, RBS 2106 and RBS 2206
Co-Siting with RBS 200 Using Hybrid Combiner
Table 40
Result Original Cabinet
SCC SCC
3 x 8 * 3 x 4 ** RBS 200
RBS 205
RBS 205
RBS 205
RBS 205
M = Mandatory
* 3 x 6 can be accomplished with a partly-equipped expansion
configuration. 1 x 8 can be accomplished with one RBS 200/RBS 205
and a partly-equipped expansion configuration.
** When using TG-synchronization, only one RBS 200/RBS 205 can
act as master. Therefore the 3 x 4 configuration, which is three separate
RBSs, must be rebuilt to one single RBS, that is, all three sectors of the
RBS 200 must be connected to the same TMCB.
4.7.2 6–TRX RBS 2000 Macro Cabinets Expanded with 12–TRX Cabinet
Co-Siting with Single TRU-Based RBS 2000 Using Filter Combiner
Table 41
Result Original
SCC SCC
1 x 18 * 1 x 6
1 x 24 ** 1 x 12
* 1 x 8, 1 x 10, 1 x 12, 1 x 14 and 1 x 16 can be accomplished with a
partly-equipped RBS 2.
** 1 x 14, 1 x 16, 1 x 18, 1 x 20 and 1 x 22 can be accomplished with
a partly-equipped RBS 2.
80 (485)
Expansion using hybrid combiner
Combiner Antennas
HCOMB (3) (3) (3)
HCOMB (3) (3) (3)
HCOMB (3) (3) (3)
HCOMB&DPX (2) (2) (2)
HCOMB (2) (2) (2)
Expansion using filter combiner
RBS 1
Basic Antennas
Configuration
D9de_2.6 (2)
D18d_2.6 (2)
D18_2.6 (2)
D9de_2.12 (2)
D18d_2.12 (2)
D18_2.12 (2)
© Ericsson Radio Systems AB
— All Rights Reserved —
TMA Original Basic
SCC Configuration
No 3 x 4 3 x G9deh_2.4
No 3 x G18dh_2.4
M 3 x G18dht_2.4
No 3 x G18dh_2.4
M 3 x G18dht_2.4
RBS 2
Original Basic
SCC Configuration
1 x 12 F9de_2.12
F18d_2.12
F18dt_2.12
1 x 12 F9de_2.12
F18d_2.12
F18dt_2.12
EN/LZT 720 0008
Antennas
(2) (2) (2)
(2) (2) (2)
(2) (2) (2)
(2) (2) (2)
(2) (2) (2)
Antennas
(2)
(2)
(2)
(2)
(2)
(2)
P2A
2001-11-28