Ericsson RBS 2106 Reference Manual page 391

Hide thumbs Also See for RBS 2106:
Table of Contents

Advertisement

The following user functions, related to the /G. 703/ 2048 kbit/s PCM
network, are available in the OMT:
The following user functions, related to the /DS1/ 1544 kbit/s PCM
network, are available in the OMT:
EN/LZT 720 0008
P2A
2001-11-28
This function makes it possible for the operator to define (or
redefine) the IDB parameter RBS TF Compensation Value.
Display TF Compensation Value
The IDB parameter RBS TF Compensation Value (in ns) is
displayed.
Display spare bits, display spare bits in timeslot 0 on G.703,
values (0 or 1) for bits Sa4-Sa8.
Define spare bits (bits can be defined independently of each other).
Display CRC-4 (Cyclic Redundancy Check /G.704/), display
whether handling of CRC-4 in timeslot 0 on G.703 is on or off.
Switch on CRC-4.
Switch off CRC-4.
Monitor maintenance data, display PCM reference data and update
changes continuously.
Modify PCM Receiver Sensitivity
Sets the individual PCM Receiver Sensitivity values for an E1
transmission interface. The values are defined and referred as
parameters PCM-A-REC-SENS and PCM-B-REC-SENS in the
IDB.
Exception: A DXU which uses the PRACT transmission circuit
does not support the PCM Receiver Sensitivity values.
Display PCM Receiver Sensitivity
Displays the individual PCM Receiver Sensitivity values for an
E1 transmission interface. The values are defined and referred as
parameters PCM-A-REC-SENS and PCM-B-REC-SENS in the
IDB.
Exception: A DXU which uses the PRACT transmission circuit
does not support the PCM Receiver Sensitivity values.
Modify LBO values for transmission interface.
Sets the individual LBO values for a T1 transmission interface.
The values are defined and referred as parameters LBO-A and
LBO-B in the IDB.
Exception: A DXU which uses the PRACT transmission circuit
does not support the LBO values.
Display LBO values for transmission interface.
Displays the individual LBO values for a T1 transmission
interface. The values are defined and stored as parameters LBO-A
and LBO-B in the IDB.
© Ericsson Radio Systems AB
— All Rights Reserved —
Operation and Maintenance Terminal
389 (485)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rbs 2206

Table of Contents