Ericsson RBS 2106 Reference Manual page 81

4.7.1 RBS 200 Expanded with 12–TRX Cabinet
Co-Siting with RBS 200 Using a Filter Combiner
Table 39
Result Original Cabinet
SCC SCC
1 x 16 * 1 x 4 RBS 200
RBS 205
RBS 205
RBS 205
RBS 205
1 x 20 1 x 8 RBS 200
**
RBS 205
RBS 205
RBS 205
RBS 205
3 x 8 3 x 4 RBS 200
***
**** RBS 205
RBS 205
RBS 205
RBS 205
M = Mandatory
* 1 x 6, 1 x 8, 1 x 10, 1 x 12 and 1 x 14 can be accomplished with a
partly-equipped expansion configuration.
** 1 x 10, 1 x 12, 1 x 14, 1 x 16 and 1 x 18 can be accomplished with
a partly-equipped expansion configuration.
*** 3 x 6 can be accomplished with a partly-equipped expansion
configuration.
**** When using TG-synchronization, only one RBS 200/RBS 205 can
act as master. Therefore the 3 x 4 configuration, which is three separate
RBSs, must be rebuilt to one single RBS, that is, all three sectors of the
RBS 200 must be connected to the same TMCB.
EN/LZT 720 0008 P2A
2001-11-28
Radio Configurations, RBS 2106 and RBS 2206
Expansion using filter combiner
Combiner Antennas
FCOMB (3)
FCOMB (3)
FCOMB (3)
FCOMB&DPX (2)
FCOMB (2)
FCOMB (3)
FCOMB (3)
FCOMB (3)
FCOMB&DPX (2)
FCOMB (2)
FCOMB (3) (3) (3)
FCOMB (3) (3) (3)
FCOMB (3) (3) (3)
FCOMB&DPX (2) (2) (2)
FCOMB (2) (2) (2)
© Ericsson Radio Systems AB
— All Rights Reserved —
TMA Original Basic
SCC Configuration
No 1x12 F9de_2.12
No F18d_2.12
M F18dt_2.12
No F18d_2.12
M F18dt_2.12
No 1x12 F9de_2.12
No F18d_2.12
M F18dt_2.12
No F18d_2.12
M F18dt_2.12
No 3x4 3 x F9de_2.4
No 3 x F18d_2.4
M 3 x F18dt_2.4
No 3 x F18d_2.4
M 3 x F18dt_2.4
Antennas
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2) (2) (2)
(2) (2) (2)
(2) (2) (2)
(2) (2) (2)
(2) (2) (2)
79 (485)